How can I install the FM Transmitter
1. Install the antenna;
2. Link the cable to the antenna;
3. Link the 50 Ohm Coax cable to the "ANT"-(BNC Type)Be sure the link is stable;
4. Link the audio input to the "Audio"-3.5MM Stereo socket;
5. Link the DC POWER module to the "POWER"¨C6.5mm POWER socket ( DC 12V(current >2A) Pay Attention to the power polar : inside positive; outside negative);
6. After electrified,the frequency is the one of last power off;
7. Frequency Increase Control, pull the button"UP", every pull can increase 100KHz,pull the button for more than 1 second,the stepping jump to 1MHz;
8. Frequency Decrease Control,pull the button"DOWN", every pull can decrease 100KHz,pull the button for more than 1 second,the stepping jump to 1MHz.
[Top]